Home
I bought a shell of an '86 RX-7 ITS car last year from a friend (thanks, Mike). It had a lot of spare parts included with the sale. I don't run an RX-7 so I don't have much experience with these parts but I've looked them over as best as I can. Pictures will be coming soon.
1. Transmission, 5-speed manual, marked '87 and stamped "CC7995". Includes slave cylinder, t/o fork, and t/o bearing (feels rough), crossmember & mount. No shifter. $200.
2. Rear differential assembly, clutch type LSD, 4.10:1 ring & pinion, rubber bushings good. $250.
3. Aluminum hood, OEM, painted yellow, weighs 25 lbs. $175.
4. Steel hood, black primer, weighs 46 lbs. $50.
5. Rear suspension upright toe eliminator kit, Racing Beat #14050, NIB. $30.
6. End link bushings set, Energy Suspension #9.8134G, NIB. $15.
7. Rear control arm bushing set, Energy Suspension #11.3103G, NIB. $10.
8. Rear camber adjuster, rod bearing ends, similar to MazdaTrix #04-7421-0000. New, never used. $50.
9. OEM GTU 5-lug aluminum wheels, set of 4, 15x6, 5x114.3, 5.5" BS, 14.5 lbs. No curb rash except for small patch one one wheel. $175.
10. OEM 5-star 5-lug aluminum wheel, 1 wheel only. 15x6, 5x114.3. $25.
11. Spare wheel & tire, aluminum, coolest looking spare I've ever seen, 15x4, 4x114.3. $40.
12. Front spindles & hubs, 5-lug, std lug, bearings good, rotors 0.850". $50/side.
13. Front spindles & hubs, 5-lug, std lug, bearings good, roughed up backing plates. $50/side.
14. Rear spindle & hub, right side only, bearing good, rotor 0.650", rubber bushing good, backing plate roughed up. $40.
15. Rear trailing arms, good lower outer bearing on right side, seal bad on left side, rubber bushings good. $50/side.
16. OEM front struts, stock electronically adjustables, seals good, includes stock springs (5 turns, 0.480" thick coil), includes one actuator. $30/both.
17. Tokico HP front struts assemblies, seals good, springs have 6 turns and 0.480" thick coil. $50/ea.
18. Complete rear suspension assembly (except diff), long wheel wheel lugs, 5-lug, missing one bolt on upper right side trailing arm, single piston brakes, rotors 0.730", rubber bushings good, bearings good. $150.
19. Rear diff and suspension crossmember (diff housing not included), 2 available, bushings good. $50/ea.
20. Front suspension and engine crossmember, missing 2 steering rack bolts. $100.
21. Steering rack, manual, inner/outer tie rods good, boots & bellows good. $50.
22. Driveshaft, FC, 30.25" center-to-center, u-joints good. $50.
23. Driveshaft, FB, 37.75" center-to-center, u-joints good. $50.
24. Rear bumper cover and frame, painted yellow, never hit. $20.
25. Headlights, pop-up, painted yellow, covers not-so-hot lookign. $20.
26. Fenders, painted yellow, no rust, reasonably straight. $20.
27. Steering column, stripped down, 1" hex drive for quick release steering wheel hub. $40.
28. CV-shafts, 1 set, average condition, good spare. $50/set.
29. CV-shafts, 2 sets, poor condition, only 1 torn boot. $30/set.
30. Rear diff housing assembly, open diff. $50.
31. Rear diff housing assembly, missing stub shafts, needs work. $40.
32. Rear springs, 12 turns, 0.410" coil. $20/set.
Post here, email me at jmr302 (at) gmail (dot) com, or call 316-259-0931. Thanks!
1. Transmission, 5-speed manual, marked '87 and stamped "CC7995". Includes slave cylinder, t/o fork, and t/o bearing (feels rough), crossmember & mount. No shifter. $200.
2. Rear differential assembly, clutch type LSD, 4.10:1 ring & pinion, rubber bushings good. $250.
3. Aluminum hood, OEM, painted yellow, weighs 25 lbs. $175.
4. Steel hood, black primer, weighs 46 lbs. $50.
5. Rear suspension upright toe eliminator kit, Racing Beat #14050, NIB. $30.
6. End link bushings set, Energy Suspension #9.8134G, NIB. $15.
7. Rear control arm bushing set, Energy Suspension #11.3103G, NIB. $10.
8. Rear camber adjuster, rod bearing ends, similar to MazdaTrix #04-7421-0000. New, never used. $50.
9. OEM GTU 5-lug aluminum wheels, set of 4, 15x6, 5x114.3, 5.5" BS, 14.5 lbs. No curb rash except for small patch one one wheel. $175.
10. OEM 5-star 5-lug aluminum wheel, 1 wheel only. 15x6, 5x114.3. $25.
11. Spare wheel & tire, aluminum, coolest looking spare I've ever seen, 15x4, 4x114.3. $40.
12. Front spindles & hubs, 5-lug, std lug, bearings good, rotors 0.850". $50/side.
13. Front spindles & hubs, 5-lug, std lug, bearings good, roughed up backing plates. $50/side.
14. Rear spindle & hub, right side only, bearing good, rotor 0.650", rubber bushing good, backing plate roughed up. $40.
15. Rear trailing arms, good lower outer bearing on right side, seal bad on left side, rubber bushings good. $50/side.
16. OEM front struts, stock electronically adjustables, seals good, includes stock springs (5 turns, 0.480" thick coil), includes one actuator. $30/both.
17. Tokico HP front struts assemblies, seals good, springs have 6 turns and 0.480" thick coil. $50/ea.
18. Complete rear suspension assembly (except diff), long wheel wheel lugs, 5-lug, missing one bolt on upper right side trailing arm, single piston brakes, rotors 0.730", rubber bushings good, bearings good. $150.
19. Rear diff and suspension crossmember (diff housing not included), 2 available, bushings good. $50/ea.
20. Front suspension and engine crossmember, missing 2 steering rack bolts. $100.
21. Steering rack, manual, inner/outer tie rods good, boots & bellows good. $50.
22. Driveshaft, FC, 30.25" center-to-center, u-joints good. $50.
23. Driveshaft, FB, 37.75" center-to-center, u-joints good. $50.
24. Rear bumper cover and frame, painted yellow, never hit. $20.
25. Headlights, pop-up, painted yellow, covers not-so-hot lookign. $20.
26. Fenders, painted yellow, no rust, reasonably straight. $20.
27. Steering column, stripped down, 1" hex drive for quick release steering wheel hub. $40.
28. CV-shafts, 1 set, average condition, good spare. $50/set.
29. CV-shafts, 2 sets, poor condition, only 1 torn boot. $30/set.
30. Rear diff housing assembly, open diff. $50.
31. Rear diff housing assembly, missing stub shafts, needs work. $40.
32. Rear springs, 12 turns, 0.410" coil. $20/set.
Post here, email me at jmr302 (at) gmail (dot) com, or call 316-259-0931. Thanks!